Glue and Adhesive for Wood Processing

No other branch of work is as traditionally engrained as that of wood and plastic handicraft, such as the furniture industry, where treating the products with adhesives and glues makes up a substantial part of the process.

Tradition, experience and trust should therefore be definite considerations when it comes to making a decision on the right adhesives.

Having been a manufacturer of adhesives since 1815, we have always been a quality-conscious and reliable partner who warrants your confidence.

	COSMOPUR Constructive  1-part polyurethane Constructional adhesive COSMOPUR Constructive is only intended for professional use, in the wood window Construction for the slot-/tap-bonding as well as in the field of wood front doors, e.g. for the joint board bonding of cassettes; here, you obtain a good compound bonding strength and a high heat resistance, heat adhesive strength according to WATT 91 approx. 7,5 N/mm². Technical data sheet Product information Technical information
	COSMOPUR K1  PUR-Adhesive Solvent-free 1-part professional adhesive for the assembly in trade and industry. Wide adhesion spectrum for a lot of different materials. Waterproof category D4.   Technical data sheet Product information Technical information

Special adhesives

	COSMOPLAST MS 460  1-part MS polymere adhesive moisture cross-linked, solvent-free, thixotrope, gap-filling, non-foaming, can be overpainted, elastic adhesive joint, wide adhesion spectrum, for a lot of different material combinations and applications. Product information Technical information
	COSMOCOLL HPL   Special dispersion lacquer glue to bond wood onto NC, SH and DD lacquered wood surfaces, especially onto high pressure laminate surfaces (HPL) as well as onto diverse plastic materials.
	COSMOPLAST 564   Special instant glue to bond in seconds. For small areas, e.g. handrails, furniture applications, profile frames onto front surfaces etc., especially suitable for absorbent materials. Technical information

Epoxy Resin Composites

• Skin material on both sides made of epoxy resin but only renolit foil wrapped
• Robust
• Minimal bend even under high temperature exposure
• Insulating foam-core material e.g. extruded polystyrene, pressure resistant, high heat insulating properties and moisture resistant
• Special adhesive which provides tensile strength and anti-friction properties

Single Component Adhesives

	COSMOPUR 810, 813  Waterproof wood bonding according to EN 204 D4 with particularly good heat resistance. Wide adhesion spectrum, suitable for the bonding of different materials, from medium viscous to thixotrope, quick setting and long film formation time.
	COSMOPUR 810 Waterproof wood bonding Technical data sheet Technical information
	COSMOPUR 813  Waterproof wood bonding Technical data sheet Product information Technical information

Dual Component Adhesives

	COSMOPUR 859/805 2-part PUR Adhesive Solvent-free 2-part adhesive, which is in particularly good for tough material combinations in the production of balustrade and facade elements; especially for larger quantities as well as for the bonding of larger surfaces. The long pot time of approx. 8 hours is particularly advantageous. The elements harden up when pressed in a pile.   Technical data sheet Technical informations
	COSMOPUR 841/805 2-part PUR-Adhesive For producing sandwich effect for automotive construction, balustrade and façade elements in rolling, spraying or scraping tasks. Solvent-free, low viscosity flowing properties, non-foaming, tough adhesive gap (85 Shore D). Pot time: approx. 40 min   Technical data sheet Technical informations